Category:Hardware & Tools/Rolling Bearings/Self-Lubricating Bearings

Product Description:Heat Conduction Oil Press Plate Machine Cleaner|Heat Conduction Oil Hot Press Machine CleanerTechnological Innovation Product: Shandong Kaidi Brand KD-L152 Heat Conduction Oil Press Plate Machine CleanerHot press machine cleaner, independently developed and produced by Shandong Kaidi Chemical, is the Shandong Kaidi Brand KD-L152 heat conduction oil press plate machine cleaner used for cleaning hot press machines. Shandong Kaidi Brand KD-L152 heat conduction oil press plate machine cleaner is an environmentally friendly solvent-based heat conduction oil cleaner. It is safe to use, non-flammable and non-explosive, and has excellent cleaning effects on various oil coke, coke, heat conduction oil coking, etc., with a cleaning rate of over 98%.Shandong Kaidi Brand KD-L152 Heat Conduction Oil Press Plate Machine Cleaner Product Features:1, Suitable for cleaning small and medium-sized hot press machines;2, Cleaning rate reaches over 98%;3, Safe and environmentally friendly, non-flammable and non-explosive;4, Recyclable and reusable, saving cleaning costs.5, Non-flammable, non-explosive, harmless, fast dissolution speed, and low evaporation rate are typical characteristics of this product.6, The dissolution speed of coke is far higher than similar products, and the evaporation speed is far lower than similar products.Shandong Kaidi Brand KD-L152 Heat Conduction Oil Press Plate Machine Cleaner Cleaning Process:1, Drain the original heat conduction oil in the system (try to drain as much as possible to reduce the amount of cleaner used), and check whether the circulation pipeline is clear to keep the system unobstructed.2, Cleaning: Add Shandong Kaidi Brand KD-L152 heat conduction oil press plate machine cleaner into the container, start the circulation pump for circulation. No heating is required, it can be used at room temperature. Switch the system valves so that all parts of the system can be cleaned. It is advisable to switch the valves once per hour. The entire cleaning time is 4 hours (if the oil layer in the system is thick, the cleaning time needs to be increased). Open any part of the circulation pipeline to check the cleaning situation. If there is still oil dirt, extend the cleaning time until it is completely stripped off before proceeding to the next step. 3, Emptying: Discharge all the cleaner and oil dirt in the system into the cleaner container. If conditions permit for purging, use an air compressor to purge the residual liquid in the jacket. If purging is not possible, open all valves and let it air dry naturally.4, Recycle cleaner: After cleaning, do not drain the cleaning solution. Although the color turns black, the product can be reused. Because the reaction between this product and oil coke is a polar dissolution reaction, after cleaning, the heat conduction oil will form an oil layer on the top of the cleaning solution, with oil residue at the bottom. Just extract the oil layer. When cleaning the equipment next time, continue to use this cleaning solution, and the effect remains unchanged.5, Cleaning completed.If you have product needs or questions, please call the Technical Center of Shandong Kaidi Chemical Industrial Cleaning Division to request cleaning solutions and quotes. kaidihuagongzjz more>