KEKGY-F High Voltage Switch Mechanical Characteristic Tester

(12-breakpoint touch screen)

I. Product Overview:
      With the development of science and technology, the requirements for the safety and reliability of electricity use are increasingly high. High voltage circuit breakers bear the dual tasks of control and protection in the power system, and their performance is directly related to the safe operation of the power system. Mechanical characteristic parameters are one of the important parameters for judging the performance of circuit breakers.
      The KEKGY-F High Voltage Switch Mechanical Characteristic Tester (12-breakpoint type) is designed based on the latest "High Voltage AC Circuit Breakers" GB1984-2003 as the blueprint, and in accordance with the national power industry standard "General Technical Conditions for High Voltage Test Equipment" Part 3, DL/T846.3-2004 High Voltage Switch Comprehensive Tester as the design basis. It provides convenience for dynamic analysis of various types of circuit breakers and is suitable for testing parameters of almost all models of metal contact SF6 switches, GIS combination appliances, vacuum switches, oil switches, pole-mounted switches, contactors, etc., produced domestically and internationally.
II. Technical Parameters
2.1、Usage Environment
    ◆Input Power: AC220V±10％ 50Hz±10％
    ◆Atmospheric Pressure: 86～106kpa
    ◆Ambient Temperature: －10～40℃
    ◆Ambient Humidity: ≦80％RH
2.2、Safety Performance
    ◆Insulation Resistance: ＞2MΩ
    ◆Dielectric Strength: Power supply to casing, power frequency 1.5KV withstand voltage for 1 minute, no flashover or flying arc.
2.3、Basic Parameters
    ◆Time: Range     20000.0ms                        Minimum Resolution 0.01ms
                Error     ① 200 ms range                    0.01ms±0.1ms
                            ② 2000 ms range                0.1ms±0.1ms
                            ③ 20000 ms range              1ms±0.1ms
    ◆Speed: Range 20.00m/s                            Minimum Resolution 0.01m/s
                Error     ① Within 0-2m/s                    ±0.1m/s±1 digit
                             ② Above 2m/s                       ±0.2m/s±1 digit
    ◆Travel:

     ◆Current: Maximum Range 20.00A, Resolution 0.01A
     ◆Output Power: DC 0～300V digitally adjustable / 20A (instantaneous operation), Resolution 1V.
     ◆Dimensions: 360mm (length) × 280mm (width) × 300mm (height)
     ◆Instrument Weight: 10kg

III. Performance Features
3.1、Performance
     ◆Time: Inherent opening and closing time of 12 breakpoints, same-phase synchronization, inter-phase synchronization;
     ◆Reclosing: Close-open, open-close, open-close-open process time for each breakpoint: one open time, one close time, two close times, short-time, no current time value;
     ◆Bounce: Closing bounce time, bounce count, bounce process, bounce waveform for each breakpoint, opening rebound amplitude for each breakpoint;
     ◆Speed: Instantaneous opening speed, instantaneous closing speed, maximum speed, time-travel characteristic curve;
     ◆Travel: Total travel, contact gap, overtravel, overshoot travel, rebound amplitude;
     ◆Current: Opening and closing current value, current waveform of opening and closing coils;
     ◆Operating Voltage: Internally provides DC 0～300V/20A digitally adjustable circuit breaker operating power, automatically completes low voltage operation test of circuit breaker, measures the operating voltage value of the circuit breaker.

3.2、Features
     ◆Suitable for mechanical characteristic tests of all models of SF6 switches, GIS combination appliances, vacuum switches, oil switches produced domestically and internationally;
     ◆Strong anti-interference ability, capable of conducting tests easily and measuring accurately even when the bypass bus of a 500KV substation is live;
     ◆Acceleration sensor (optional), linear sensor, rotary sensor, installation is also very convenient and simple;
     ◆One operation of the switch yields all data and corresponding waveform maps for the mechanical characteristic test of the switch;
     ◆The host can store on-site test data, with an internal real-time clock, facilitating archiving of test dates and times;
     ◆Large screen, wide temperature, direct view, backlit LCD, full Chinese display of all data and maps, electronically adjustable LCD contrast, power-off memory;
     ◆Chinese menu operation, easy to use. The instrument has a built-in printer, allowing quick printing of all data and maps at any time;
     ◆Comes with data analysis management software, can be connected to a PC for operation, test results can be output to various dot matrix, laser, or inkjet printers to print test reports, making on-site testing computerized;
     ◆Instantaneous opening and closing speed selection and custom functions, can be set as needed, arbitrary analysis, suitable for speed measurement of any model of switch produced by any switch manufacturer domestically or internationally.