I. FRTU Meter Product Introduction

The FRTU series intelligent power distribution monitoring modules are suitable for low-voltage AC power distribution systems. Installed on low-voltage feeder cabinets, they make low-voltage switchgear more intelligent, enabling monitoring and control of electrical parameters for circuit breakers and contactors in low-voltage power distribution system feeder cabinets.

II. Meter Product Selection

FRTU-01 Low-Voltage Intelligent Power Distribution Monitoring Device

FRTU-02 Low-Voltage Intelligent Power Distribution Monitoring Device

FRTU-04 Low-Voltage Intelligent Power Distribution Monitoring Device

FRTU-06 Low-Voltage Intelligent Power Distribution Monitoring Device

FRTU-08 Low-Voltage Intelligent Power Distribution Monitoring Device

FRTU-10 Low-Voltage Intelligent Power Distribution Monitoring Device

FRTU-10I Low-Voltage Intelligent Power Distribution Monitoring Device

FRTU-12 Low-Voltage Intelligent Power Distribution Monitoring Device

The FRTU series intelligent power distribution monitoring modules are suitable for low-voltage AC power distribution systems, installed on low-voltage feeder cabinets,

making low-voltage switchgear more intelligent, enabling monitoring and control of electrical parameters for circuit breakers and contactors in low-voltage power distribution system feeder cabinets.

FRTU-NⅠ/Ⅱ/Ⅲ/Ⅳ features 3-phase current measurement per circuit, 3-phase voltage measurement, 3-phase active power measurement,

3-phase reactive power measurement, 3-phase energy measurement, power factor measurement, circuit switch on/off, cabinet temperature, surge protector status detection,

circuit relay output control function, and MODBUS (RS485) communication capability. N: 2; 4; 6; 8;

10; 12.

III. Consultation Information

For more product information, performance, and pricing, please call our company.

Contact: Manager Wu

Phone: 13891834587 (same number for WeChat)

QQ: 704151787

Email: [email protected]

IV. Technical Parameters

Applicable Objects: Suitable for feeder cabinets or AC bus boxes composed of 1-12 circuit breakers.

Voltage: Three-phase voltage UA, UB, UC (V) (three-phase four-wire connection)

Current: IA, IB, IC (A) per feeder circuit for 1-12 circuits; I per feeder circuit for 12 circuits

Active Power: Total P, PA, PB, PC (W) per feeder circuit for 1-12 circuits; P (W) per feeder circuit for 12 circuits

Reactive Power: Total Q, QA, QB, QC (VAR) per feeder circuit for 1-12 circuits; Q (VAR) per feeder circuit for 12 circuits

Apparent Power: Total S, SA, SB, SC (VA) per feeder circuit for 1-12 circuits; S (VA) per feeder circuit for 12 circuits

Power Factor: Pf, PfA, PfB, PfC per feeder circuit for 1-10 circuits; Pf per feeder circuit for 12 circuits

Forward Active Energy Consumption: Each feeder circuit

Reverse Active Energy Consumption: Each feeder circuit

Forward Reactive Energy Consumption: Each feeder circuit

Reverse Reactive Energy Consumption: Each feeder circuit

Apparent Energy Consumption: Each feeder circuit

Communication: 1 RS-485 port, Modbus RTU communication protocol

Telemetry Measurement: Circuit breaker on/off, fault switch status, surge protector status, voltage and current over-limit alarm status for 1-12 circuits

Main Unit: Rail-mounted or screw-fixed installation,

Display: Panel-embedded installation

V. FRTU Meter Applications

Widely used in automated power monitoring systems, it can fully monitor the operating status of the power system and also provide reliable and effective data basis for power system upgrades.

VI. Partial Typical Projects

Baoji Jufeng Tianxiahui International Shopping Plaza, Shaanxi Electronic Information Technology Building, Changchun Wanda Times Square, Shenyang International Trade Center, Chengdu Runchi International Plaza, Kunshan Wanda Plaza, Xi'an Kempinski Hotel, Hancheng Wenyuan Pavilion Hotel, Zhongxin Chanba Peninsula, Tianjin Shanggu Commercial Center, Deyang Broadcasting and Television Center