Three-dimensional elastic filler
Price:Negotiable
Contact Info
- Add:宜興市和橋鎮(zhèn)南新人民中路4號, Zip: 214200
- Contact: 梅聽芳
- Tel:0510-87875118
- Email:[email protected]
Other Products
Description
Additional Information
>Product Introduction
The elastic three-dimensional filler selects several high-quality varieties from polyolefins and polyamides that are corrosion-resistant, temperature-resistant, and aging-resistant. It is blended with additives such as hydrophilicity, adsorption, and heat-oxygen resistance. Using a special wire drawing and filament texturing process, the filaments are interlaced and fixed onto a corrosion-resistant, high-strength central rope. Due to the excellent material selection and process formulation, the filler has a proper balance of rigidity and flexibility, allowing the filaments to radiate in a uniform three-dimensional arrangement. This forms a suspended three-dimensional elastic filler unit. Within the effective area, the filler can spread uniformly in all directions, enabling thorough mixing and exchange of gas, water, and biofilm. The biofilm not only adheres evenly to each filament, maintaining good activity and variable porosity, but also acquires an increasingly larger specific surface area during operation, facilitating excellent metabolism. This characteristic and phenomenon are currently unmatched by other domestic fillers.
>Product Features
Compared to rigid honeycomb fillers, the three-dimensional elastic filler has greater variable porosity and does not clog. Compared to soft fillers, it has a longer material lifespan and does not adhere or form clumps. Compared to semi-soft fillers, it offers a larger specific surface area, faster biofilm attachment, and lower cost. Therefore, this filler can be confirmed as the fourth-generation high-efficiency, energy-saving, and innovative filler following various rigid, soft, and semi-soft fillers.
>Application Scope
Widely used as biological filler in biological contact oxidation tanks and hydrolysis acidification tanks.
>Main Technical Parameters Table (Reference)
|
Model (mm)
|
Unit Length (m/m3)
|
Unit Weight (kg/m3)
|
Film Formation Weight (kg/m3)
|
Specific Surface Area (m2/m3)
|
Filament Diameter (mm)
|
|
?150
|
44
|
2.0
|
69
|
310
|
0.45
|
|
?160
|
39
|
1.9
|
66
|
280
|
0.45
|
|
?180
|
30
|
1.8
|
62
|
265
|
0.45
|
|
?200
|
25
|
1.7
|
60
|
250
|
0.45
|
| Industry Category | Chemicals/Paints & Coatings/Printing Inks |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | |
| Stock: | |
| Origin: |
