Fiberglass Reinforced Plastic Cable Conduit
Contact Info
- Add:湖北省漢川市經濟開發區霍城大道131號, Zip:
- Contact: 龐永衛
- Tel:0712-8611888
- Email:[email protected]
Other Products
Product Introduction
Fiberglass reinforced plastic (FRP) pipe is a lightweight, high-strength, corrosion-resistant non-metallic pipe. It is manufactured by winding resin-impregnated glass fibers layer by layer around a rotating mandrel according to process requirements, with quartz sand evenly distributed between the fibers as a sand core layer. The pipe wall structure is reasonably advanced, maximizing material performance. While meeting the required strength, it enhances rigidity and ensures product stability and reliability. FRP sand-core pipes are widely accepted by users due to their excellent chemical corrosion resistance, lightweight and high strength, anti-scaling properties, strong seismic resistance, longer service life compared to ordinary steel pipes, low overall cost, quick installation, and safety
reliability.
Product Features
1. Excellent corrosion resistance, aging resistance, and heat resistance.
2. Good freeze resistance; the pipe will not crack when frozen at temperatures below -20°C.
3. Good design flexibility, lightweight, high strength, easy transportation, and low maintenance costs.
4. Excellent hydraulic conditions, smooth inner wall, no scaling or rust, low friction resistance, and high transmission capacity.
Main Application Areas
Composite FRP cable protection pipes, used with specialized fittings, can be configured according to different engineering requirements. FRP cable pipe construction images show multi-layer, multi-row cable piping systems suitable for the following high-demand scenarios:
1. Protection for buried power and communication cables in urban areas.
2. Protection for cables laid directly under roadways or at major traffic intersections.
3. Protection for cables in special environments such as bridges and rivers, particularly using composite FRP cable
protection pipes, widely applicable in the following engineering construction fields:
1. Urban power grid construction and renovation projects.
2. Urban municipal renovation projects.
3. Civil airport engineering construction.
4. Industrial parks and residential area construction.
5. Transportation, road, and bridge engineering construction.
Product Specifications
|
Inner Diameter mm |
80 |
100 |
150 |
175 |
|||||||
|
Wall Thickness mm |
3.0 |
5.0 |
3.0 |
5.0 |
3.0 |
5.0 |
8.0 |
3.0 |
5.0 |
8.0 |
10.0 |
|
Inner Diameter mm |
200 |
250 |
|||||||||
|
Wall Thickness mm |
3.0 |
5.0 |
8.0 |
10.0 |
5.0 |
8.0 |
10.0 |
||||
Product Parameters
|
Item |
Unit |
Technical Index |
|
Tensile Strength |
Mpa |
≥160 |
|
Flexural Strength |
Mpa |
≥190 |
|
Flexural Strength After Immersion |
Gpa |
≥150 |
|
Barcol Hardness |
≥38 |
|
|
Ring Stiffness (5℃) |
Kps |
sn25 sn50 sn100 ≥25≥50≥100 |
|
Load Deformation Temperature (tie1.8) |
℃ |
≥160 |
|
Drop Hammer Impact |
After immersion, mechanically wound conduits should show no delamination, cracks, or breaks on the inner and outer walls. |
|
|
Flat Line Load Retention Rate |
% |
≥85 |
|
Metal Oxide Content |
% |
Medium-alkali glass fiber should be 11.6–12.4, alkali-free glass fiber should be ≥0.8 |
|
Oxygen Index |
% |
≥26 |
| Industry Category | Electrical Equipment & Supplies/Power Distribution & Transmission/Cables |
|---|---|
| Product Category | |
| Brand: | 湖北暢通管業股份有限公司 |
| Spec: | |
| Stock: | |
| Origin: | China / Hubei / Xiaoganshi |
