Browser Hyperlink Multiplexer Control Panel
Contact Info
- Add:龍華大廈617號(hào), Zip: 233000
- Contact: 陳先生
- Tel:0552-2055903
- Email:[email protected]
Other Products
This board is based on the standard Ethernet control protocol. It allows remote control of relay switches for lighting, electrical devices, and other equipment by entering parameters in the browser address bar or via hyperlinks. The specific control methods (address bar input or hyperlink) are formatted as follows: http://192.168.2.199/XX=Y
Here, 192.168.2.199 is the board's IP address (factory default; users can also customize it based on their actual Ethernet configuration). XX is the switch number, which must be a two-digit value. Single-digit numbers should be padded with a leading zero. The valid range is 00~15, corresponding to K0~K16, totaling 16 switch channels. If the switch number is set to "18", all 16 switches will operate simultaneously. Y is the switch state setting value: 0 for off, 1 for on.
For example, the hyperlink: http://192.168.2.199/06=1 means controlling switch 06 to turn on.
http://192.168.2.199/06=0 means controlling switch 06 to turn off.
http://192.168.2.199/18=0 means all switches turn off simultaneously.
http://192.168.2.199/18=1 means all switches turn on simultaneously.
This enables control of various switch actions through WORD documents, PowerPoint presentations, and FLASH files, achieving synchronized control of lighting and equipment for demonstration purposes.
| Industry Category | Electrical Equipment & Supplies/Power Distribution & Transmission/Power Distribution Cabinets |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | |
| Stock: | |
| Origin: | China / Anhui / Bangbushi |
