Lightning Protection Power Outlet CNS 3-D-PRC
Contact Info
- Address:深圳市龍華區(qū)大浪街道龍華社區(qū)龍軍花園9棟2單元1202, Zip: 518023
- Contact: 劉先生
- Tel:0755-88834928
- Email:[email protected]
Other Products
| Performance Overview Table CNS 3-D-PRC Lightning Protection Socket | Usage Advantages |
| LED Monitoring Device | Continuously monitors the working status of the varistor |
| Rated Load Current up to 10A | Capable of handling higher load currents |
| Built-in Resettable Overload Protector | Higher safety, automatically disconnects during equipment failure |
| Y-Type Circuit | Provides safer transient surge protection for phase, neutral, and ground lines |
Function and Application Areas
The OBO CNS 3-D-PRC (Class D lightning protection socket, installed in LPZ2-3 zones) is specifically designed and manufactured for terminal equipment such as computers, monitors, and printers. It provides protection for all terminal devices connected to the socket.
The protection circuit of the OBO CNS 3-D-PRC consists of gas discharge tubes and varistors, with continuous monitoring via a built-in thermal fuse. When the green LED is lit, it indicates that the lightning protection socket is in good condition. If a fault occurs, the red LED lights up, the green LED turns off, and a continuous audible signal alerts maintenance personnel for replacement.
Installation
Installation of the OBO CNS 3-D-PRC is very simple: just plug it directly into a socket on the circuit, and then plug the device's plug into the CNS 3-D-PRC socket. It is important to ensure that the lightning protection socket is properly grounded.
Technical Parameters
| CNS 3-D-PRC Lightning Protection Socket | CNS 3-D-PRC |
| Operating Voltage UN Maximum Continuous Operating Voltage UC LPZ Zone Complies with DIN VDE0675/6 (11.89) A1, A2/IEC 61643-1 Rated Load Current IL Rated Discharge Current In (8/20) Maximum Discharge Current Imax (8/20) Voltage Protection Level UL-N UL/N-PE Response Time TA IEC Line Socket Cable Length | 230V (50-60Hz) 250V～ 2→3 Class D Class III 10A 2.5kA 7kA ≤1.0kV ≤1.5kV ＜25 ns Complies with DIN-IEC 320-1 Standard 2.0m |
| Industry Category: | Chemicals/Carbon Materials/Graphite |
|---|---|
| Product Category: | |
| Brand: | |
| Spec: | |
| Stock: | |
| Origin: |
