Isopar H
Contact Info
- Address:近鐵城市廣場1518弄2號1107室, Zip: 200333
- Contact: 李先生
- Tel:021-51699260-810
- Email:[email protected]
Other Products
I. Introduction to Isopar H Product
Isopar H has a distillation range of 179-188°C, a flash point of 54°C, a density of 0.758 g/cm3, a viscosity of 1.80 mm2/s (25°C), a Saybolt color of +30, an aromatic content of <0.001%, a relative evaporation rate of 9 (n-BuAc=100), an aniline point of 85, a KB value of 26, a bromine value of <5 mg/100g, a surface tension of 23 mN/m (25°C), and a refractive index of 1.423 (20°C).
The product is packaged in iron drums, with a specification of 156 kg/drum.
Virtually odorless, enhancing comfort for workers and end-users.
Narrow distillation range provides excellent flash point and drying time.
Ultra-low aromatic concentration significantly reduces the risk of exposure to aromatic products.
Compatible with most packaging materials.
High chemical stability, long service life of finished products.
Low freezing point.
Low electrical conductivity.
Low surface tension, excellent wetting and surface spreading properties.
Aerosols
Decorative coatings
Electrical Discharge Machining (EDM)
Metalworking and rust preventive oils
Personal care products
Industrial cleaners
Printing ink fluids
Premium dry cleaning fluids for garments
Crop protection.
II. Technical Specifications of Isopar H Isoparaffin
Item | Quality Indicator | Reference Standard | Test Method |
Distillation Range (°C) | 179-188 | ASTM D86/ASTM D1078 | Measured |
Flash Point (°C) | 54 | ASTM D56/ASTM D93 | Measured |
Density (15°C, g/cm3) | 0.758 | ASTM D4052 | Measured |
Viscosity (25°C, mm2/s) | 1.80 | ASTM D445 | Measured |
Aromatic Content (%, by Volume) | < 0.01 | ASTM D1319 | Measured |
Relative Evaporation Rate (n-BuAc=100) | 9 | EC-M-F01 | Measured |
Aniline Point (°C, mixed) | 85 | ASTM D611 | Measured |
Bromine Value (mg/100g) | < 5 | ASTM D2701 | Measured |
Color (Saybolt) | +30 | ASTM D156/ASTM D1500 | Measured |
III. Precautions
1. ExxonMobil environmentally friendly solvent drums have an ExxonMobil anti-counterfeiting mark on the lid and an anti-counterfeiting barcode on the drum surface. Identify the brand to avoid counterfeits.
2. Environmentally friendly solvent oil should not be stored upright outdoors to prevent contamination by moisture and impurities.
3. For indoor storage, place upright with the drum face up for easy extraction.
4. Tighten the seal cap to keep the drum sealed.
5. Do not place flammable materials nearby; open flames are strictly prohibited, and do not bring ignition sources near the drum.
| Industry Category: | Chemicals/Fine Chemical Intermediates/Nitrogen-Containing Intermediates |
|---|---|
| Product Category: | |
| Brand: | |
| Spec: | |
| Stock: | |
| Origin: |
